No products in the cart.
- Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
- Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
Specification | ||||
---|---|---|---|---|
Measuring range | AC 0.1 - 130Arms (185Apeak) | DC 0 - ±180A | ||
Output voltage | AC 10mV/A | DC 10mV/A | ||
Accuracy | ±1.2%rdg±0.4mV (50/60Hz) ±2.5%rdg±0.4mV (40 - 1kHz) | ±1.2%rdg±0.4mV (*) | ||
Low battery warning | 2.2V±0.2V or less - Red LED flash (1.9V±0.2V - Automatically power off) | |||
Conductor size | Max. Φ12mm | |||
Withstand voltage | AC 3540V (RMS 50/60Hz) for 5 sec. | |||
Operating temperature & humidity range | -10 to 55ºC, relative humidity 85% or less (no condensation) | |||
Output impedance | Approx. 10Ω or less | |||
Applicable standards | IEC 61010-1 CAT III 300V Pollution degree 2, IEC 61010-2-032, IEC 61326-1 | |||
Power source | DC3V (size AAA alkaline battery LR03×2pcs) * Continuous use: approx. 40 hours (Auto power off: approx. 20 minutes) | |||
Cord length | Approx. 1,200mm | |||
Output connector | Φ4mm banana plug | |||
Dimensions | 127(L)×42(W)×22(D) mm | |||
Weight | Approx. 140g | |||
Accessories | Soft case, LR03×2, Instruction manual |