Floating voltage can be measured
- Floating voltage:
phase to phase voltage not grounded - KEW 5020-01:
KEW 5020 logger with KEW 8309 (1 pce.)
| For use with following model |
|---|
| 5020 |
| Specification | |
|---|---|
| Max. input voltage | |AC 600Vrms(sin), 848.4Vpeak |
| Input system | |Differential input (can measure floating voltage) |
| Output voltage | |AC 0 - 60mV (output/input: 0.1mV/V) |
| Measuring ranges | |6 - 600V |
| Accuracy (Frequency range) | |±1.0%rdg±0.1mV (50/60Hz) |
| Operating Temperature and Humidity Ranges | |-10 - 50ºC, relative humidity 85% or less (no condensation) |
| Input impedance | |Approx. 3.4MΩ |
| Output impedance | |Approx. 180Ω |
| Location for use | |Altitude up to 2000m, Indoors |
| Applicable standards | |IEC/EN 61010-1:2001 CAT III 600V, pollution degree 2 |IEC/EN 61010-031:2002, IEC 61326 (EMC) |
| Withstand voltage | |5350V (rms 50/60Hz) for 5 sec. |between measuring terminal and enclosure |
| Dimensions | |87(L)×26(W)×17(D)mm (excluding protrusions) |
| Weight | |Approx. 135g |
| Total length | |Approx. 2m |
| Output connector | |MINI DIN 6PIN |
| Accessories | |Instruction manual |
| Optional | |7185 (Extension cable) |
