Shop/Fluke/Electrical Tester . Voltage Detector
Fluke 1AC II
Easy-To-Use Voltage Detector
VoltAlert™ ac voltage tester from Fluke are easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there’s voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory flsoor, in the shop, or at home.
- Fits in a shirt pocket for convenience
- All outer surfaces are non-conductive for safety
- Detects voltage without metallic contact
- Manufactured, printed and packaged in the US
- Quickly locates the hot, neutral and ground terminals in any receptacle
| Specifications | |
|---|---|
| Voltage | 1AC-A (90 - 600 Volts AC) |
| 1AC-P (200 - 600 Volts AC) | |
| 1AC-A (110 - 1000 Volts AC) Australia only | |
| 1AC-P2 (200 - 600 Volts AC) NZ only | |
| Environmental Specifications | |
| Operating Temperature | -10°C to 50 °C (14°F to 122°F) |
| Humidity (Without Condensation) | 0 °C to 30 °C, 95% (32°F to 86°F) |
| 30 °C to 40 °C, 75% (86°F to 104°F) | |
| 40 °C tp 50 °C, 45% (104°F to 122°F) | |
| Operating Altitude | 3000 m (9750 ft max) |
| Enclosure | IEC 529, IP54 |
| Safety Specifications | |
| Safety Rating | CAT III-600 V |
| ANSI/ISA-S82.01-94 | |
| IEC 1010-1, 1990 | |
| IEC 1010-2-031 | |
| Mechanical & General Specifications | |
| Size | 146mm L x 19 mm D (5.75" L x 0.75" D) |
| Weight | 41 g with batteries (1.45 oz) |
| Outer surface | Probe is composed of injection molded high-impact, non-flammable PVC and ABS |
