Fluke 414D

Note : Harga dapat berubah sewaktu-waktuAuthorized Distributor

Put the Fluke 414D on your tool belt and reach beyond the common tape measure – up to 50 meters (165 ft). This professional-grade laser distance meter is fast and easy to use, improving accuracy and reducing measurement errors. You’ll save time and money at every step.

The 414D reduces errors, saves time, saves money.
Features:

  • The most advanced laser technology for distance measurement
  • Simple one-button operation to instantly measure distance between two objects
  • Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)
  • Bright laser for easy targeting even at longer distances
  • Quick calculation of area (square feet/meters) and volume
  • Easy addition and subtraction function
  • Pythagoras function indirectly measures height via two other measurements
  • Stores up to five measurement results
  • Battery life of 3000 measurements with automatic shut-off feature
  • Two-line display with display hold (until next button is pressed)
  • Carrying pouch secures to your tool belt
  • Powered by two AAA batteries

All meters offer:

  • Reduction of estimation errors, saving both time and money
  • The most advanced 2 laser technology for distance measurement
  • Instant measurement with one-button operation
  • Easy addition and subtraction function
  • Quick calculation of area (square footage) and volume
  • Easy addition and subtraction of measurements
  • Minimum/maximum function
  • Improved battery life from automatic shut-off feature
  • Pythagoras calculation for determining distance indirectly from two other measurements
  • Pouch with Fluke logo
  • Three-year warranty
414D 419D 424D
Distance Measurement
Typical Measuring Tolerance[1] ± 2.0 mm [3] ± 1.0 mm [3]
Maximum Measuring Tolerance[2] ± 3.0 mm [3] ± 2.0 mm [3]
Range at Leica target plate GZM26 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft
Typical Range[1] 40 m / 130 ft 80 m / 260 ft 80 m / 260 ft
Range at unfavorable condition[4] 35 m / 115 ft 60 m / 195 ft 60 m / 195 ft
Smallest unit displayed 1 mm / 1/16 in 6 /30 / 60 mm (10 / 50 / 100 m)
laser point at distances 6 /30 / 60 mm (10 / 50 / 100 m) 6 /30 / 60 mm (10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam[5] No No ± 0.2°
Measuring tolerance to housing[5] No No ± 0.2°
Range No No 360°
General
Laser class 2
Laser type 635 nm, <1 mW
Protection class IP40 IP54
Automatic laser off After 90 seconds
Automatic power off after 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000 measurements Up to 5,000 measurements
Size (H X W X L) 116mm Length 53mm Width 33mm Depth 127mm Length 56mm Width 33mm Depth 127mm Length 56mm Width 33mm Depth
Weight (with batteries) 113 g 153 g 158 g
Temperature range: Storage Operation -25 °C to +70°C (-13 °F to +158 °F) 0 °C to +40 °C (32 °F to +104 °F) -25 °C to +70°C (-13 °F to +158 °F) -10 °C to +50 °C (14 °F to +122 °F)
Calibration cycle Not applicable Not applicable Tilt and compass
Maximum altitude 3000 m 3000 m 3000 m
Maximum relative humidity 85% at 20 °F to 120°F (-7 °C to 50 °C) 85% at 20 °F to 120°F (-7 °C to 50 °C) 85% at 20 °F to 120°F (-7 °C to 50 °C)
Safety IEC Standard No. 61010-1:2001 EN60825-1:2007 (Class II)
EMC EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010
[1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C. [2] Applies for 10 to 500 % target reflectivity, high background illumination, -10 °C to +50 °C. [3] Tolerances apply from 0.05 m to 10 m with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. [4] Applies for 100 % target reflectivity, background illumination between 10'000 lux and 30'000 lux. [5] After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.